There are 89 products.
Aim Sports RPM Bridge An interface designed to allow RPM overlay on SmartyCam HD videos when the vehicle has no ECU. The RPM Bridge obtaines RPM data with a connection to the coil or by reading a square wave signal generated by the ignition system. Is used in conjunction with an ECU Bridge whenever engine data needs to be visualized on a display or on a SmartyCam HD video, if no recording is required. Sold separately.
Aim Sports Temperature Control Hub Keep all temperatures of your engine under control With TC Hub four additional thermocouples can be connected via CAN to all AiM loggers. Using more TC Hub you can easily keep under control all your temperature sensors data, monitoring each single cylinder exhaust gas temperature, together with water, oil and head temperatures. Waterproof and robust thanks to its aluminum structure, TC Hub provides reliable data as its sampling frequency is configurable up...
Aim Sports ECU Bridge Available in two variants With OBDII connector, for immediate plug&play connection to the OBDII port on systems with stock ECUs. With CAN/RS232 connection, for direct installation on aftermarket ECUs. An interface module connecting the ECU to an AiM visor as well as to the on-board camera SmartyCam HD, whenever a datalogger is not available. The ECU Bridge module is to be used in case the Engine Control Unit transmits data in the following...
Aim Sports MX Strada Data Logger Kit Memory Module is a small SD Card holder that can be connected via CAN bus to these AiM loggers: MXL2, MXG, MXS, EVO4S, EVO5, MXG 1.2, MXP, MXS 1.2 Its management is really simple: just connect Strada Kit to your AiM device and data will be saved on the SD card as well as stored in the logger memory. No configuration is needed. The SD card can be removed and replaced even during pit stops, while the car engine is still ON, making it...
Aim Sports Fuel/Oil 0-160 Bar Pressure Sensor 3/8-24 Thread This sensor fits the measurement of oil and fuel pressure up to 160 Bars of pressure. The sensor is sold with a 40 cm cable.
Aim Sports Fuel/Oil 0-2000 PSI Pressure Sensor 1/8 NPT This sensor fits the measurement of oil and fuel pressure up to 2000 PSI of pressure. The sensor is sold with a 40 cm cable.
Aim Sports Fuel/Oil 0-300 PSI Pressure Sensor 1/8 NPT This sensor fits the measurement of oil and fuel pressure up to 300 PSI of pressure. The sensor is sold with a 40 cm cable.
Aim Sports Fuel/Oil 0-50 PSI Pressure Sensor 1/8 NPT This sensor fits the measurement of oil and fuel pressure up to 50 PSI of pressure. The sensor is sold with a 40 cm cable.
Aim Sports Fuel/Oil 0-150 PSI Pressure Sensor 1/8 NPT This sensor fits the measurement of oil and fuel pressure up to 150 PSI of pressure. The sensor is sold with a 40 cm cable.
Aim Sports Fuel/Oil 0-160 Bar Pressure Sensor M10 Thread This sensor fits the measurement of oil and fuel pressure up to 160 Bars of pressure. The sensor is sold with a 40 cm cable.
Aim Sports Fuel/Oil 0-100 Bar Pressure Sensor M10 Thread This sensor fits the measurement of oil and fuel pressure up to 100 Bars of pressure. The sensor is sold with a 40 cm cable.
Aim Sports Fuel/Oil 0-10 Bar Pressure Sensor 1/8 NPT This sensor fits the measurement of oil and fuel pressure up to 10 Bars of pressure. The sensor is sold with a 40 cm cable.
Aim Sports Fuel/Oil 0-10 Bar Pressure Sensor 3/8-24 Thread This sensor fits the measurement of oil and fuel pressure up to 10 Bars of pressure. The sensor is sold with a 40 cm cable.
Aim Sports Fuel/Oil 0-10 Bar Pressure Sensor M10 Thread This sensor fits the measurement of oil and fuel pressure up to 10 Bars of pressure. The sensor is sold with a 40 cm cable.
Aim Sports Fuel/Oil 0-5 Bar Pressure Sensor M10 Thread This sensor fits the measurement of oil and fuel pressure up to 5 Bars of pressure. The sensor is sold with a 40 cm cable.
Aim Sports Rear Camera Add-On For MX Series The Rear Camera offers even more features: It can reflect the image It let you freely set the rearview with Park Overlay or without it Optical Format 1/4 inch Color CMOS TV system NTSC Pixel array 648x488 Image area 3,63mm - 2,73mm Frame rate 60 fps Temperature -30°/+80° The MX Series of AiM devices is now able to manage up to two rear cameras which show the driver what happens behind him both when he’s driving and while...
Aim Sports Optical CAN Lap Receiver This receiver allows to sample lap time in the traditional way but using the CAN bus protocol. This is useful, for example, when the GPS receiver cannot be used. The optical CAN receiver connects to cables labelled "CAN Exp" or to "Exp" connector of any AiM device.
Aim Sports Fuel/Oil 0-5 Bar Pressure Sensor 3/8-24 Thread This sensor fits the measurement of oil and fuel pressure up to 5 Bars of pressure. The sensor is sold with a 40 cm cable.
Aim Sports Fuel/Oil 0-100 Bar Pressure Sensor 3/8-24 Thread This sensor fits the measurement of oil and fuel pressure up to 100 Bars of pressure. The sensor is sold with a 40 cm cable.
Aim Sports Rotary 10G Potentiometer Sensor AiM loggers can measure an elements rotation (i.e. steering angle) using the 10 laps (10G) steering rotary potentiometer sensor.
Aim Sports Throttle Potentiometer Speed Sensor AiM instruments can measure the relative displacement between two different points using a sensor (rotary potentiometer) directly connected to the two measure points. This sensor may be used to measure angular displacements, such as throttle position. This instrument’s mechanical measure range goes up to 130°, while the electrical measure range goes up to 106°.
Aim Sports VDO 0-10 Bar Pressure Sensor M10 Thread This sensor measures pressure of liquids like oil and gasoline. Do not use it to measure brake pressure. It needs a careful installation. The VDO sensor is made of a cylinder that has to be screwed to the engine and two connectors that sample GND and pressure signals. If the engine thread is bigger than the cylinder thread AiM suggests to use joints. AiM recommends to tightly screw the sensor to the engine so that vibrations do...
Aim Sports Tire Temperature Sensor AiM loggers can measure tire temperature connecting to one or more temperature sensors. Use a self-built bracket to install the sensor; place it far from strong heat sources (the exhaust pipe for instance) and from electromagnetic interference sources. The best installation point is the internal part of the fender to avoid damaged from road debris.
Aim Sports Solo 2/DL GPS Lap Timer Mounting Kit AiM Sports has designed specific mounting kits to allow easy installation and connection of both Solo 2/Solo 2 DL units. Compatible with the following models: 2003-2019 CBR 600RR 2013-2015 CBR 600RR HRC with D11 marked ECU 2004-2016 CBR 1000RR 2014-2016 CBR 1000RR HRC Honda CBR 1000RR HRC and CBR 600RR HRC previous to those listed above are not supported. The bracket can be used with Solo 2 and Solo 2 DL units. n the box: 1...
