Filter Products

Categories

Show/hide more options

Subcategories

Brands

Show all

Price

$0.00 - $11,460.00

Accessories

Accessories

There are 14 products.

Showing 1-14 of 14 item(s)

Aim Sports MX Strada Data Logger Kit

Aim Sports MX Strada Data Logger Kit Turn any MX Strada into a full-working logger. MXG 1.2 MXP MXS 1.2 Composed of the Strada Logger, Data Hub and GPS08 Module, the kit will turn any MX Strada into a full-working logger, able to collect data ready to be analized on Race Studio 3 to make you improve your performance, understand whether there are problems or not within your vehicle and much much more. Reliable and easy to install, the Strada Kit is just what you need...

Regular price USD $1,149.00 Price $1,149.00

Aim Sports Strada Data Logger

Aim Sports Strada Data Logger Step your game up with the brand new Strada Logger Own a gorgeous MX Strada (MXS 1.2 Strada, MXP Strada, MXG1.2 Strada) but miss the functionalities of a logger? Level your device up with Strada Logger

Regular price USD $850.00 Price $850.00

Aim Sports LCU-One Lambda Controller

Aim Sports LCU-One Lambda Controller LCU-One Lambda controller range of products allow you to perfectly tune the carburetion of your engine as well as keep it at its best, appreciably improving your car performances. All LCU-One lambda controllers use a wide band Bosch LSU 4.9 probe either for its capacity of saving the original calibration for its all life and for its duration: Bosch LSU 4.9 probe, in fact, has been designed to last for more than 100,000 km on a stock...

Regular price USD $399.00 Price $399.00

Aim Sports GPS08 Module

Aim Sports GPS08 Module GPS technology represents a true revolution in racing data acquisition. Now, thanks to GPS08 Module and Race Studio 3 software, as soon as you start your track session you can immediately sample lap and split times as well as speed, position and acceleration... all the information needed for engine tuning as well as for improving your driving technique. GPS08 is more precise than most of the existing GPS systems, as it has been designed to add to the GPS satellite's...

Regular price USD $299.00 Price $299.00

Aim Sports Channel Expansion

Aim Sports Channel Expansion Ehnance your logger performance, this compact CAN device provides virtually endless data acquisition system expansion options. Channel Expansion hub adds up to four freely configurable analog and/or digital channels without occupying or modifying the existing system channels. Thanks to the CAN technology, wiring squeezes your harness from four cables to one single connection. Using a Data Hub you can also connect to the master logger as many Channel Expansion as...

Regular price USD $250.00 Price $250.00

Aim Sports Temperature Control Hub

Aim Sports Temperature Control Hub Keep all temperatures of your engine under control With TC Hub four additional thermocouples can be connected via CAN to all AiM loggers. Using more TC Hub you can easily keep under control all your temperature sensors data, monitoring each single cylinder exhaust gas temperature, together with water, oil and head temperatures. Waterproof and robust thanks to its aluminum structure, TC Hub provides reliable data as its sampling frequency is configurable up...

Regular price USD $238.00 Price $238.00

Aim Sports RPM Bridge Module

Aim Sports RPM Bridge An interface designed to allow RPM overlay on SmartyCam HD videos when the vehicle has no ECU. The RPM Bridge obtaines RPM data with a connection to the coil or by reading a square wave signal generated by the ignition system. Is used in conjunction with an ECU Bridge whenever engine data needs to be visualized on a display or on a SmartyCam HD video, if no recording is required. Sold separately.

Regular price USD $210.00 Price $210.00

Aim Sports ECU Bridge Module

Aim Sports ECU Bridge Available in two variants With OBDII connector, for immediate plug&play connection to the OBDII port on systems with stock ECUs. With CAN/RS232 connection, for direct installation on aftermarket ECUs. An interface module connecting the ECU to an AiM visor as well as to the on-board camera SmartyCam HD, whenever a datalogger is not available. The ECU Bridge module is to be used in case the Engine Control Unit transmits data in the following...

Regular price USD $210.00 Price $210.00

Aim Sports Memory Module

Aim Sports MX Strada Data Logger Kit Memory Module is a small SD Card holder that can be connected via CAN bus to these AiM loggers: MXL2, MXG, MXS, EVO4S, EVO5, MXG 1.2, MXP, MXS 1.2 Its management is really simple: just connect Strada Kit to your AiM device and data will be saved on the SD card as well as stored in the logger memory. No configuration is needed. The SD card can be removed and replaced even during pit stops, while the car engine is still ON, making it...

Regular price USD $179.00 Price $179.00

Aim Sports Rear Camera Add-On For MX Series

Aim Sports Rear Camera Add-On For MX Series The Rear Camera offers even more features: It can reflect the image It let you freely set the rearview with Park Overlay or without it Optical Format 1/4 inch Color CMOS TV system NTSC Pixel array 648x488 Image area 3,63mm - 2,73mm Frame rate 60 fps Temperature -30°/+80° The MX Series of AiM devices is now able to manage up to two rear cameras which show the driver what happens behind him both when he’s driving and while...

Regular price USD $125.00 Price $125.00

Aim Sports MemoryKey Data Storage

Aim Sports MemoryKey Data Storage MemoryKey allows an immediate storage of data acquired by AiM loggers (MXL and EVO4) during test and race sessions as well as their transfer on a PC, for analysis with the powerful Race Studio 2 software. With 32 MB internal memory, MemoryKey can store data concerning many sessions. No more need to wait for data download from the logger to the PC: you just plug MemoryKey in MXL or EVO4 before the session and it will automatically store data...

Regular price USD $125.00 Price $125.00

Aim Sports Remote Button Extension

Aim Sports Remote Button Extension The remote buttons interface has been designed to make Aim Sports loggers and dash loggers use easier when the system buttons can be difficult to push: typically, when the dashboard where the system is installed is too narrow or too far from your reach. Basically, it offers 6 contacts to connect to 6 different pushbuttons. The first four are configured in order to simulate the systems buttons, the fifth is intended to turn ON/OFF the...

Regular price USD $95.00 Price $95.00

Aim Sports Four-Way Data Hub

Aim Sports Data Hub The acquisition of all essential data you need to evaluate your car performance needs the connection of many peripherals to your datalogger. This implies the presence of a great number of cables. To solve this problem, AiM developed Data Hub, the new CAN connection multiplier that works as an interface between all AiM loggers and their peripheral equipments. Each Hub connects the logger with four peripherals: i.e. LCU lambda controller, GPS08 Module and...

Regular price USD $60.00 Price $60.00

Aim Sports Two-Way Data Hub

Aim Sports Data Hub The acquisition of all essential data you need to evaluate your car performance needs the connection of many peripherals to your datalogger. This implies the presence of a great number of cables. To solve this problem, AiM developed Data Hub, the new CAN connection multiplier that works as an interface between all AiM loggers and their peripheral equipments. Each Hub connects the logger with four peripherals: i.e. LCU lambda controller, GPS08 Module and...

Regular price USD $60.00 Price $60.00