Woodcraft 35mm Rise Front Mount Adjustable Angle Clip-On Risers
Woodcraft 3-piece design clip-on risers arerace proven and makes it easy to
service your clipons below the triple clamp without having to disassemble the
entire front end. Special attention has also been taken to save weight wherever
possible on these clamps. The bars themselves are available in both 12 and 13.5
inches lengths and are easily adjusted to whatever custom width you desire.
Racers no longer have to worry about replacing an expensive complete clipon
assembly after a crash because these risers use an inexpensive universal handlebar.
Having an adjustable bar angle that uses a standard bar is a difference that
will make your riding experience better.
These clipons have a 35mm rise over a conventional race clipon plus they have
an adjustable bar angle between 2 and 12 degrees. The 35mm designation is not
a rise over your stock clip-ons (since every stock clipon is different). This
clipon will give you the ability to have a race style clipon assembly with the
option to get the bars up higher for rider comfort. Different risers can be
ordered in the future if you want a higher or lower setup. Comes with black
bars.
Note: You will need to assess your motorcycle for both handlebar
clearance and available cable/brake line length. This is a universal unit that
is not model specific. Some additional work may be required for fitment.
It is the responsibility of the customer to ensure correct and proper sizing
when placing an order. There are no returns, cancellations or exchanges on any
apparel, no exceptions. This includes apparel such as leather suits, jackets,
pants, clothing, boots and gloves. If you have any questions regarding sizing,
please refer to the manufacturers sizing charts or contact Bayside Performance
for further assistance.
The following are final sale, no exchanges, cancellations or returns:
Helmets
Apparel And Protection
Special Order Items
Made To Order Items
Electrical
Race Bodywork
Clearance Items
Items Removed From Original Packaging
Parts That Have Been Installed Or Attempted To Be Installed
Product Exchange/Return Policy:
If you would like to exchange a product, contact Bayside Performance within
one (1) day upon the receipt of the sales order. All returns must be approved
by Bayside Performance. Upon Bayside Performance approval for inspection of
the returned product, Bayside Performance assigns a Return Authorization (RA)
Number. The RA number is only for the product that Bayside Performance has approved
for inspection.
Shipping costs of the returned product is the liability of the customer; Bayside
Performance does not accept any collect on delivery (COD) shipments. The RA
number must be clearly marked on the outside of the box; returns without the
marked RA number will be refused and may be returned to the customer. All approved
returns must received by Bayside Performance within ten (10) days of the RA
number provided to the customer. Always send your item back Canada Post with
tracking and email us the tracking number.
All returned merchandise must be in its original packaging with attached tags,
instructions and in new condition. Both the product and packaging must be in
new condition free from scratches, blemishes, tears or dents. It is the customer's
responsibility to ensure the returning merchandise to Bayside Performance is
adequately packaged, preventing any loss or damage to the returning product.
Any parts that have been removed from the package or attempted to be installed
are not returnable.
All claims for missing products must be made by the end of the next business
day upon the receipt of the order, after that time Bayside Performance will
not be liable for any shortages. All claims for damaged merchandise must be
made to the shipping carrier; ensure that you keep all shipping cartons and
all packaging materials for carrier inspection. It is the responsibility of
the customer to initiate any claims with the carrier.
All returned merchandise to Bayside Performance is subject to a 20% restocking
fee. All canceled orders are subject to a 20% restocking fee if the item has
already been ordered in. Any purchases that are refused and returned to Bayside
Performance are deemed non-deliverable and subject to a restocking fee, all
shipping costs and possibly our final sale policy.
Shipping and insurance costs are non-refundable. If a refund is approved by
Bayside Performance, the reimbursement of money will be issued to the customer
in the same monetary form as the payment was made to Bayside Performance at
the time of the purchase.
Inventory:
Bayside Performance specializes in custom order hard to get or made to
order items. Our website shows inventory two ways.
We are experiencing random Covid-19 lockdown related delays that are out of our control. We ask that you be patient during this time.
In Stock:
In stock items would be shipped same or next business day however
inventory numbers are not a guarantee. If in stock items are not
available to ship right away we would contact you with an estimate.
Available To Order:
Available to order items where not discontinued the last time manually
checked.They may have estimated time in which they should leave our
store but this is not a guarantee. Available to order items must arrive
to us first and be checked prior to shipping to you. We do stock the
most commonly sold items and have a decent inventory however many items
have to be sourced at the time of sale from many different distributors.
We would contact you with a delivery estimate before processing your
order if the posted estimate was incorrect or was not posted.
Parts Fitment Guarantee:
Aftermarket parts do not always fit like OEM parts. Some aftermarket parts
require modifications or fitment to work correctly. For example carbon fiber
and race bodywork components often need trimming and modifications to fit
correctly.
Bayside Performance only guarantees fitment of these parts if they are installed
by a licensed tech with experience installing aftermarket parts. Bayside Performance
reserves the right to investigate each fitment issue and decide whether the
part is incorrect or incorrect installation is the problem. The customer is
responsible to install parts correctly or hire a company with the skills to
complete the work properly. Please call us for more details.
Woodcraft Racing Zero Offset Clip-Ons
Woodcraft Zero Offset Clip-ons give you the ergonomics you want and the clearance
you need. These 2-piece Clipons are designed for security, durability, and ease
of use.
Includes specially designed short bar with a locking security groove and optional
reservoir bracket.
Woodcraft
Clip-On Riser 10mm Spacer Kit
10mm riser spacers
will alleviate interferance issues with the stock top clamp on many models
allowing the installation of riser clip-ons. These spacers mount in between
the clamp and the riser, spacing the handlebars 10mm forward.
Woodcraft 3" Clip-On Riser Assembly
Features:
3-piece design
Lightweight
6061-T6 grade aluminum bars
Improved strength and adjustability
Easy installation
Pair of bars included in kit
Standard bar length 12"
Extra long bar length 13.5"
Made in USA
Woodcraft
Racing 3 Piece Split Clip-On Assembly
Features:
Lightweight
6061-T6 grade aluminum bars
Improved strength andadjustability
Easy installation
Pair of bars included in kit
Standard bar length 12"
Extra long bar length 13.5"
Made in USA
Please check the Woodcraft
Application Chart before ordering clip-on kit.
Woodcraft 75mm Rise Front Mount Adjustable Angle Clip-On Risers
Woodcraft 3-piece design clip-on risers arerace proven and makes it easy to
service your clipons below the triple clamp without having to disassemble the
entire front end. Special attention has also been taken to save weight wherever
possible on these clamps. The bars themselves are available in both 12 and 13.5
inches lengths and are easily adjusted to whatever custom width you desire.
Racers no longer have to...
Woodcraft 2.5" Clip-On Riser Assembly
Features:
3-piece design
Lightweight
6061-T6 grade aluminum bars
Improved strength and adjustability
Easy installation
Pair of bars included in kit
Standard bar length 12"
Extra long bar length 13.5"
Made in USA
Woodcraft 2" Clip-On Riser Assembly
Features:
3-piece design
Lightweight
6061-T6 grade aluminum bars
Improved strength and adjustability
These clipons have a 2 inch rise over a conventional race...
Woodcraft Racing Replacement Clip-On Bar
Features:
Standard bar 12"
Extra long bar 13.5"
7/8" diameter
Made from aircraft grade 6061-T6
Comes complete with solid pastic bar ends on each side
Sold individually
Woodcraft 35mm Rise Side Mount Adjustable Angle Clip-On Risers
These risers provide incredible opportunities for adjustment. Whether your
a sport bike rider looking for more comfort, or you ride a bike with handlebars
that you wish had a sportier feel, these side mount adjustable risers are made
to help you transform the feel of your bike.
3-piece design is race proven and makes it easy to service your clipons below
the triple clamp without having to disassemble the entire front...
Woodcraft 1" Clip-On Riser Assembly
Features:
3-piece design
Lightweight
6061-T6 grade aluminum bars
Improved strength and adjustability
Easy installation
Pair of bars included in kit
Standard bar length 12"
Extra long bar length 13.5"
Made in USA
Woodcraft 75mm Rise Side Mount Adjustable Angle Clip-On Risers
These risers provide incredible opportunities for adjustment. Whether your
a sport bike rider looking for more comfort, or you ride a bike with handlebars
that you wish had a sportier feel, these side mount adjustable risers are made
to help you transform the feel of your bike.
3-piece design is race proven and makes it easy to service your clipons below
the triple clamp without having to disassemble the entire front...
Woodcraft 1.5 Inch Clip-On Riser Assembly
Features:
3-piece design
Lightweight
6061-T6 grade aluminum bars
Improved strength and adjustability
Easy installation
Pair of bars included in kit
Standard bar length 12"
Extra long bar length 13.5"
Made in USA
Woodcraft 2" Clip-On Riser Assembly
Features:
3-piece design
Lightweight
6061-T6 grade aluminum bars
Improved strength and adjustability
These clipons have a 2 inch rise over a conventional race clipon
Easy installation
Pair of bars included in kit
Standard bar length 12"
Extra long bar length 13.5"
Made in USA
Woodcraft Universal Reservoir Mount Bracket
This bar mounted bracket can be set up to hold the brake reservoir either parpendicular
or parallel to the handlebar. It simply clamps on to the portion of the handlebar
that sticks through the main clipon to make securing the reservoir a snap. Depending
on the model of bike you may need to lengthen or shorten the brake hose to achieve
the optimal length. Fits 7/8" bars.