There are 16 products.
Andreani Dyno Spring Press DS1 Test the calibration of fork springs, shock springs, bump rubbers, MC and MX fork leg, complete MTB fork, and shock absorbers. The DS1 is an indispensable tool for measuring the elastic or static thrust released by the suspensions or by the individual components present in them. Using this machine, the operator will not simply be able to determine the load (K) of a spring, but will have a precise reading of...
Andreani Vacuum Pump SP5, 110v It is provided of two tanks of 2,5l capacity each and of a 220V motor, more powerful than the previous models, capable to perform the vacuum procedure more rapidly and effectively than before. The work is automatically managed by the advanced software that gives the user the possibility to set and customize various parameters. Equipped with last generation electrovalves, the SP5 has also a colour touch screen...
Andreani Vacuum Pump SP4, 110v This tool allows to automatically vacuuming shocks by removing the air, both from the oil and inside the shock absorber, fast and precisely. The SP4, that represents an SP2 upgrade, is provided of two identical higher capacity tanks (2l each) that allow to carry out several vacuum cycles without refilling them; tanks capacity that allows to work on car shock absorbers too. The SP4 is equipped with a software that...
Andreani Vacuum Pump SP2, 110v This tool allows to semi-automatically vacuuming shocks by removing the air, both from the oil and inside the shock absorber, fast and precisely. The SP2 – by optimizing processing times and reducing error margins – is a tool that gives an added value to every workshop. In the current vacuum pumps range, the SP2 is the cheaper and compact one. With its two little tanks of 1 and 1.5l, the SP2 allows to use two different kinds of...
Andreani Shock digital length measurement tool and Stretcher Measure exact lengths of shock absorbers Simulate extension of the shock to test full stroke, sag, or installed length Assist in setting preload by allowing controlled adjustment and measurement. Improve efficiency and repeatability during suspension tuning or service by providing quick, reliable data.
Motion Pro Pivot Suspension Vise Features Designed to make suspension service simple and quick Holds shocks and forks securely while you change oil, re-valve, or change seals Pivoting head holds parts in any position, with mechanical stops every 45 degrees Aluminum Soft Jaw Vise holds cylindrically shaped parts utilizing a 4 point grip system Large side holds 39 mm to 69 mm diameter partsSmall side holds 14 mm to 39 mm diameter parts Steel Frame is rigid yet has a small footprint, with 4...
Motion Pro Shock Spring Compressor Features Safely removes the spring on most coilover shocks Includes adapters for both clevis and eyelet type shocks Adapter plates adjust to fit spring retaining collars from 56 mm to 96 mm Innovative, compact, easy to use design Low friction radial thrust bearing Lifetime limited warranty
Motion Pro Nitrogen Shock Gauge & Filler Features: 300 psi capacity Bleeder valve and T-handle plunger pin chuck Swivel chuck has a 12 inch flexible hose Instructions, carrying box and Schrader valve extension included (required on some Showa shocks) Replacement Shrader valve extension is item 08-0132 Made in the USA Regulator and transfer hose required to get Nitrogen from tank to Nitrogen Shock Gauge and Filler.
Race Tech Fork Spring Compressor Relieves spring pressure for taking off fork tube caps without damaging threads Innovative design allows tool to work with forks on or off the bike Fast, Simple, saves money and time
Motion Pro Wheel Bearing Remover 8 Piece Metric Tool Set 8 piece metric set includes large and small drivers, 10 mm, 12 mm, 15 mm, 17 mm, 20 mm, and 25 mm removers Dependable split collet design Also available as individual components Heat treated for durability and long service life One year warranty against manufacturing and material defects
Motion Pro Ringer Fork Seal Driver Features Innovative design makes tool easier and safer to use than old fashioned pin aligned drivers Anodized aluminum locking ring features knurled finish for secure no-slip grip and positively locks body halves together during use No more worrying about part of the tool falling off and damaging the fork leg or hitting your feet Perfectly weighted to drive seals Body halves are machined from durable carbon steel and feature high quality protective black...
Motion Pro Sage Scale II Features New and improved version of the original Motion Pro Folding Sag Scale Can be used to check front or rear sag New swing out design is compact and fits in most tool boxes Adjustable zero set point for direct scale reading (no subtracting required) Cone shaped axle locating pin fits hollow axles up to 20mm with repeatable precision 0-120mm measurement scales in 1mm increments Reversible multi-scale design accommodates most mini and full size motorcycles Made...
Motion Pro Fork Cap Wrench Features For removing the caps on Showa MX Forks One end is 46mm, the other is 50mm Can be used for removal of the compression stack CNC machined for precise fit and tolerance 6061 aluminum material is non-marring on fork caps
Motion Pro Fork Cap Wrench Features 6 point box wrench for removing the fork cap (cartridge) on WP 4860 MXMA dual chamber closed cartridge (WP USD 48 mm) forks on late-model KTM’s 12 mm slot for holding the damper rod for removing the rebound bolt. This allows for the removal of the cartridge from the lower fork leg Made from billet 6061-T6 and anodized Motion Pro blue Laser engraved markings with Motion Pro logo Original Motion Pro design
$19.59 - $28.41
Motion Pro Micro Bleeder M5X0.8 Features: For use on most KYB inverted forks with a M5x0.8 air bleed screw in the fork cap New ultra-compact, low profile design is only 11mm high installed Stainless steel body is stronger and will not corrode Will fit on many late model Japanese off-road motorcycles Easy to install, simply replace the OEM bleeder screw with the Micro Bleeder Reduces harshness caused by air build-up Allows bleeding of air pressure without tools One of the easiest bolt-on...
Motion Pro Micro Bleeder M4X0.7 Features: For 2007 or later SX/SXF/XC/XCF/XCW models with WP 4860 MXMA CC Closed Cartridge fork caps (P/N 4860.0516S1) as well as the WP 4CS fork. Also for use on all 1999 and later WP 43/WP 48 fork caps (P//N's 4860.0074S and 4860.0075S) with external spring preload adjustment. These fork caps require a 4-pin spanner (MP P/N 08-0290) to remove the fork cap. New ultra-compact, low profile design is only 11mm high installed Stainless steel body is stronger...