List of products by brand Motion Pro

Motion Pro

There are 81 products.

Showing 1-24 of 81 item(s)

Motion Pro Pivot Suspension Vise

Motion Pro Pivot Suspension Vise Features Designed to make suspension service simple and quick Holds shocks and forks securely while you change oil, re-valve, or change seals Pivoting head holds parts in any position, with mechanical stops every 45 degrees Aluminum Soft Jaw Vise holds cylindrically shaped parts utilizing a 4 point grip system Large side holds 39 mm to 69 mm diameter partsSmall side holds 14 mm to 39 mm diameter parts Steel Frame is rigid yet has a small footprint, with 4...

Regular price USD $424.99 Price $403.74

Motion Pro 2-Stroke Leak Down Tester

Motion Pro 2-Stroke Leak Down Tester Features Designed to check for air leaks in 2-stroke engines Includes air pressure gauge, pump-up bulb and fittings and adapters for most single and twin cylinder 2-stroke motorcycle engines Intake adapters are sized for 35mm, 41mm, 43mm, or 46mm intake manifolds Expandable rubber exhaust port plugs fit round ports from 35mm to 60mm in diameter Packed in a convenient carry box, complete with instructions Made in the USAt

Regular price USD $285.99 Price $271.69

Motion Pro Crankcase Splitter V2

Motion Pro Crankcase Splitter V2 Features This new tool from Motion Pro is the fastest and easiest to use case splitter ever devised Unique design makes it easy to center puller over crankshaftGrooved puller studs are fast and simple to install Captured retaining collars in puller arms allow quick adjustment and set up Durable tool steel body with protective black finish Billet 6061 aluminum arms with blue anodized finish Includes 5, 6 and 8 mm threads on puller studs to fit various engine...

Regular price USD $259.99 Price $246.99

Motion Pro Nitrogen Shock Gauge & Filler

Motion Pro Nitrogen Shock Gauge & Filler Features: 300 psi capacity Bleeder valve and T-handle plunger pin chuck Swivel chuck has a 12 inch flexible hose Instructions, carrying box and Schrader valve extension included (required on some Showa shocks) Replacement Shrader valve extension is item 08-0132 Made in the USA Regulator and transfer hose required to get Nitrogen from tank to Nitrogen Shock Gauge and Filler.

Regular price USD $209.99 Price $199.49

Motion Pro Shock Spring Compressor

Motion Pro Shock Spring Compressor Features Safely removes the spring on most coilover shocks Includes adapters for both clevis and eyelet type shocks Adapter plates adjust to fit spring retaining collars from 56 mm to 96 mm Innovative, compact, easy to use design Low friction radial thrust bearing Lifetime limited warranty

Regular price USD $184.99 Price $175.74

Motion Pro Nippon Denso Fuel Injector Cleaner Kit

Motion Pro Fuel Injector Cleaner Kit Features Easily cleans most fuel injectors Will flush and back flush injectors for best possible cleaning process No compressed air required Requires aerosol can of fuel injection cleaner (not included) Push button switch to turn fuel injector on with LED indicator light Durable anodized billet aluminum construction Built tough for everyday shop use 9 volt battery included Replacement pigtails available Patent pending

Regular price USD $179.99 Price $170.99

Motion Pro HYB Fuel Injector Cleaner Kit

Motion Pro Fuel Injector Cleaner Kit Features Easily cleans most fuel injectors Will flush and back flush injectors for best possible cleaning process No compressed air required Requires aerosol can of fuel injection cleaner (not included) Push button switch to turn fuel injector on with LED indicator light Durable anodized billet aluminum construction Built tough for everyday shop use 9 volt battery included Replacement pigtails available Patent pending

Regular price USD $179.99 Price $170.99

Motion Pro EV1 Fuel Injector Cleaner Kit

Motion Pro Fuel Injector Cleaner Kit Features Easily cleans most fuel injectors Will flush and back flush injectors for best possible cleaning process No compressed air required Requires aerosol can of fuel injection cleaner (not included) Push button switch to turn fuel injector on with LED indicator light Durable anodized billet aluminum construction Built tough for everyday shop use 9 volt battery included Replacement pigtails available Patent pending

Regular price USD $179.99 Price $170.99

Motion Pro EV6 Fuel Injector Cleaner Kit

Motion Pro Fuel Injector Cleaner Kit Features Easily cleans most fuel injectors Will flush and back flush injectors for best possible cleaning process No compressed air required Requires aerosol can of fuel injection cleaner (not included) Push button switch to turn fuel injector on with LED indicator light Durable anodized billet aluminum construction Built tough for everyday shop use 9 volt battery included Replacement pigtails available Patent pending

Regular price USD $179.99 Price $170.99

Motion Pro HV2 Fuel Injector Cleaner Kit

Motion Pro Fuel Injector Cleaner Kit Features Easily cleans most fuel injectors Will flush and back flush injectors for best possible cleaning process No compressed air required Requires aerosol can of fuel injection cleaner (not included) Push button switch to turn fuel injector on with LED indicator light Durable anodized billet aluminum construction Built tough for everyday shop use 9 volt battery included Replacement pigtails available Patent pending

Regular price USD $179.99 Price $170.99

Motion Pro 2-Stroke Timer Tool

MotionPro 2-Stroke Leak Down Tester Features Designed for water cooled engines Kit includes a dial indicator with extensions and a 14 mm spark plug thread adapter Allows inspection and adjustment of ignition timing Scaled in millimeters Designed to clear frame tubes on most recent water cooled models Gauge face size 1 1/2"

Regular price USD $178.99 Price $170.04

Motion Pro Digital 4-Stroke Leak Down Tester

Motion Pro Digital 4-Stroke Leak Down Tester Accurately displays the total percentage of leakage past the rings, head gasket, intake and exhaust valves Speeds up troubleshooting and helps to isolate bad components Precision digital display provides accurate, easy to read results Easy to use precision pressure regulator built into body of tool Rugged rubber boot protects digital gauges Tests at 80, psi cylinder pressure. Requires 90 PSI air source. Includes 1/4" male industrial...

Regular price USD $175.99 Price $167.19

Motion Pro Deluxe Suspension Bearing Service Tool

Motion Pro Deluxe Suspension Bearing Service Tool Features Designed for quick and easy removal and precise installation of suspension linkage and swing arm pivot bearings Designed for use on 20 & 22 mm id bearings Fits most off-road motorcycles & ATV’s Includes blind bearing collet for removal of 20 mm blind bearings (other collet sizes available) Anodized aluminum mandrels reduce the possibility of damaging bearing surfaces Laser etched markings for easy size identification...

Regular price USD $174.99 Price $166.24

Motion Pro Steering Stem Bearing Tool

Motion Pro Steering Stem Bearing Tool Features Removes and installs tapered roller bearing at base of steering stem Fits most motorcycles with tapered roller bearing at base of steering stem Includes 26 mm, 28 mm, 30-31 mm, 35-36 mm race protectors for installing bearing race Blue anodized bearing protectors are made from 6061 billet aluminum and laser etched for easy identification Compact design to fit within steering stops on lower triple clamp Removal process requires cutting outer...

Regular price USD $174.99 Price $166.24

Motion Pro Titanium 4 Piece Wrench Set Tool

Motion Pro Compression Tester These super-light wrenches weigh less than one quarter of the weight of standard steel wrenches Made from tool-grade titanium alloy Extremely lightweight and compact design is perfect for trail tool packs Exclusive Motion Pro design for optimized strength and performance Titanium alloy will never rust or corrode Ergonomic handle Laser etched markings for easy identification Patented design

Regular price USD $165.99 Price $157.69

Motion Pro Heavy-Duty Clutch Holding Tool

Motion Pro Heavy-Duty Clutch Holding Tool> Securely holds clutch hubs on most motorcycles and ATVs Can be used to remove the locking ring on UTV fuel cells to remove fuel pumps Reversible blades work on conventional square spline and on round spline style clutch hubs Aircraft grade billet aluminum body with durable blue anodized finish Precision machined stainless steel blades are strong and durable Billet aluminum clamp knob for fast and easy installation and removal Extended knurled...

Regular price USD $162.99 Price $154.84

Motion Pro Rev3 Throttle Kit

Motion Pro Rev3 Throttle Kit The REV3 throttle has several different size reels that will change how much twist is necessary for the throttle to completely open the carbs or throttle bodies on a motorcycle. The larger the reel is, the shorter the twist. Each reel size will shorten the twist by about 10 degrees. If your stock throttle has a 40 mm reel and stock twist is 90 degrees (1/4 turn), the 45mm reel will reduce the twist to 80 degrees and the 50 mm reel will reduce...

Regular price USD $159.99 Price $151.99

Motion Pro T-6 Valve Spring Compressor With 18mm And 24mm Adapter

Motion Pro T-6 Valve Spring Compressor Features Quick release system presses straight against the retainer to eliminate side loading the valve and keepers Works on all motorcycle, ATV, UTV, and small engine cylinder heads Billet 6061 aluminum frame provides unmatched strength and stiffness and lower weight Fully adjustable top and bottom Aluminum lower adjuster will not damage or scratch valves Durable blue anodized finish with laser engraved markings Simple, fast, and easy to use Includes...

Regular price USD $144.99 Price $137.74

Motion Pro T-6 Valve Spring Compressor With 24mm And 28mm Adapter

Motion Pro T-6 Valve Spring Compressor Features Quick release system presses straight against the retainer to eliminate side loading the valve and keepers Works on all motorcycle, ATV, UTV, and small engine cylinder heads Billet 6061 aluminum frame provides unmatched strength and stiffness and lower weight Fully adjustable top and bottom Aluminum lower adjuster will not damage or scratch valves Durable blue anodized finish with laser engraved markings Simple, fast, and easy to use Includes...

Regular price USD $144.99 Price $137.74

Motion Pro T-6 Valve Spring Compressor With 24mm Adapter

Motion Pro T-6 Valve Spring Compressor Features Quick release system presses straight against the retainer to eliminate side loading the valve and keepers Works on all motorcycle, ATV, UTV, and small engine cylinder heads Billet 6061 aluminum frame provides unmatched strength and stiffness and lower weight Fully adjustable top and bottom Aluminum lower adjuster will not damage or scratch valves Durable blue anodized finish with laser engraved markings Simple, fast, and easy to use Includes...

Regular price USD $134.99 Price $128.24

Motion Pro Axis Truing-Balance Stand

Motion Pro Axis Truing-Balance Stand Features: Precision built tool for building, truing, and balancing wheels Innovative single sided design allows easy access to spokes and nipples High quality bearings allow precise wheel balancing 15 mm axle fits most modern street and dirt bikes and many mini bikes Hub cones hold wheel firmly in place. Cones work with wheel bearing I.D. from 18 mm to 32 mm Adjustable pointer for truing wheels Simple folding design for easy storage when not in use...

Regular price USD $134.99 Price $128.24

Motion Pro Jumbo Chain Breaker Tool

Motion Pro Jumbo Chain Breaker Tool Features: Designed to break roller chain 520 up to 630 (Fits all standard & O-ring chain sizes 520 to 630) Designed to rivet chain up to 530 (not 630) Master link side plate press kit included to press on side plates on chains up to 530 (not 630) Screws & attachments are heat treated for strength and durability The extractor pin is precisely guided by a removable guide, ensuring long pin life May be bolted to a work bench, supported in a vise...

Regular price USD $131.99 Price $125.39

Motion Pro U-Joint Press Tool For ATV/UTVs

Motion Pro U-Joint Press Tool Features Easiest way to service and replace U-Joints Floating press plate allows the use of a hammer for stubborn joints 16 mm, 22 mm and 27 mm adapters fit most ATV and UTV applications 16 mm & 20 mm drive tips made of durable hardened steel Laser etched size marking on adapters and tips Heavy-duty steel construction Heat-treated for strength and durability Durable black oxide coating

Regular price USD $128.99 Price $122.54