Designed for track enthusiasts and those who want something truly innovative
from their motorbike calipers, Brembo GP4-RR takes its inspiration from the
monobloc caliper developed for MotoGP and makes it available to the general
public, exclusively for use on the track.
The Brembo GP4-RR caliper is presented with a totally different look, inspired
by the lines and technologies of Brembo’s futuristic racing calipers and
echoing the design of the GP4-ms Brembo's first monobloc caliper made from a
single piece, which is also available for road use.
With the aim of optimizing stiffness and guaranteeing low weight, the Brembo
GP4-RR caliper is completely machined from billet with the help of the latest
CAD/CAM technology, resulting in a leading mass to rigidity ratio in its category.
In addition, thanks to the use of simulation software it was possible to optimize
the shape of the caliper body, revolutionizing the typical style of competition
calipers and moving the product’s technical and performance levels even
higher.
The Brembo GP4-RR monobloc caliper comes with a hard-anodized finish, a treatment
developed for racing competition that prevents wear on the caliper body, guaranteeing
performance over time.
The component is completed by four, titanium pistons of 32-36mm diameter. It
can also accommodate brake pads with an increased surface area compared to the
previous version, further increasing braking performance.
It is the responsibility of the customer to ensure correct and proper sizing
when placing an order. There are no returns, cancellations or exchanges on any
apparel, no exceptions. This includes apparel such as leather suits, jackets,
pants, clothing, boots and gloves. If you have any questions regarding sizing,
please refer to the manufacturers sizing charts or contact Bayside Performance
for further assistance.
The following are final sale, no exchanges, cancellations or returns:
Helmets
Apparel And Protection
Special Order Items
Made To Order Items
Electrical
Race Bodywork
Clearance Items
Items Removed From Original Packaging
Parts That Have Been Installed Or Attempted To Be Installed
Product Exchange/Return Policy:
If you would like to exchange a product, contact Bayside Performance within
one (1) day upon the receipt of the sales order. All returns must be approved
by Bayside Performance. Upon Bayside Performance approval for inspection of
the returned product, Bayside Performance assigns a Return Authorization (RA)
Number. The RA number is only for the product that Bayside Performance has approved
for inspection.
Shipping costs of the returned product is the liability of the customer; Bayside
Performance does not accept any collect on delivery (COD) shipments. The RA
number must be clearly marked on the outside of the box; returns without the
marked RA number will be refused and may be returned to the customer. All approved
returns must received by Bayside Performance within ten (10) days of the RA
number provided to the customer. Always send your item back Canada Post with
tracking and email us the tracking number.
All returned merchandise must be in its original packaging with attached tags,
instructions and in new condition. Both the product and packaging must be in
new condition free from scratches, blemishes, tears or dents. It is the customer's
responsibility to ensure the returning merchandise to Bayside Performance is
adequately packaged, preventing any loss or damage to the returning product.
Any parts that have been removed from the package or attempted to be installed
are not returnable.
All claims for missing products must be made by the end of the next business
day upon the receipt of the order, after that time Bayside Performance will
not be liable for any shortages. All claims for damaged merchandise must be
made to the shipping carrier; ensure that you keep all shipping cartons and
all packaging materials for carrier inspection. It is the responsibility of
the customer to initiate any claims with the carrier.
All returned merchandise to Bayside Performance is subject to a 20% restocking
fee. All canceled orders are subject to a 20% restocking fee if the item has
already been ordered in. Any purchases that are refused and returned to Bayside
Performance are deemed non-deliverable and subject to a restocking fee, all
shipping costs and possibly our final sale policy.
Shipping and insurance costs are non-refundable. If a refund is approved by
Bayside Performance, the reimbursement of money will be issued to the customer
in the same monetary form as the payment was made to Bayside Performance at
the time of the purchase.
Inventory:
Bayside Performance specializes in custom order hard to get or made to
order items. Our website shows inventory two ways.
We are experiencing random Covid-19 lockdown related delays that are out of our control. We ask that you be patient during this time.
In Stock:
In stock items would be shipped same or next business day however
inventory numbers are not a guarantee. If in stock items are not
available to ship right away we would contact you with an estimate.
Available To Order:
Available to order items where not discontinued the last time manually
checked.They may have estimated time in which they should leave our
store but this is not a guarantee. Available to order items must arrive
to us first and be checked prior to shipping to you. We do stock the
most commonly sold items and have a decent inventory however many items
have to be sourced at the time of sale from many different distributors.
We would contact you with a delivery estimate before processing your
order if the posted estimate was incorrect or was not posted.
Parts Fitment Guarantee:
Aftermarket parts do not always fit like OEM parts. Some aftermarket parts
require modifications or fitment to work correctly. For example carbon fiber
and race bodywork components often need trimming and modifications to fit
correctly.
Bayside Performance only guarantees fitment of these parts if they are installed
by a licensed tech with experience installing aftermarket parts. Bayside Performance
reserves the right to investigate each fitment issue and decide whether the
part is incorrect or incorrect installation is the problem. The customer is
responsible to install parts correctly or hire a company with the skills to
complete the work properly. Please call us for more details.
Brembo M4 Front Brake Caliper Set
Features:
Cast aluminum monobloc
1 piece caliper body
4 aluminum pistons 34mm
Stainless steel hardware
Radial mount
Titanium anodic oxidation
Offset: 30mm
Compatible disc height 32mm-34mm
Brake pads included
Brake pad shape C
Sold as a set, left and right
Brembo GP4-RX Front Brake Caliper Set
The body of GP4-RX caliper is carved entirely from a billet and consists of two
mechanically connected pieces. Particular care was devoted to seeking high braking
power and rigidity by using innovative design solutions. The hydraulics are
the result of careful fine-tuning. The use of a single piston diameter allowed
a further increase in braking power and modularity.
Features:
CNC billet aluminum monobloc
2 piece caliper body
4...
Brembo M50 Front Brake Caliper
Features:
Cast aluminum monobloc
1 piece caliper body
4 aluminum pistons 30mm
Stainless steel hardware
100mm radial mount
Offset: 30mm
Compatible disc height 32mm-34mm
Brake pads included
Brake pad shape C
Sold each
Brembo GP4-RX Front Brake Caliper Set
The body of GP4-RX caliper is carved entirely from a billet and consists of two
mechanically connected pieces. Particular care was devoted to seeking high braking
power and rigidity by using innovative design solutions. The hydraulics are
the result of careful fine-tuning. The use of a single piston diameter allowed
a further increase in braking power and modularity.
Features:
CNC billet aluminum monobloc
2 piece caliper body
4...
Brembo GP4-RS Front Brake Caliper Set
Designed for racing enthusiasts and for those who want real innovation for
their bike's brake calipers, the Brembo GP4-RS was inspired by the one-piece
caliper developed for the MotoGP and now available to enthusiasts everywhere.
Lightweight
The GP4-RS one-piece caliper was created using a very complex foundry technique
exclusive to Brembo. The result is a caliper that is 10% lighter than the renowned
M4 One-Piece, a long-standing champion...
Brembo GP4-RB Front Brake Caliper Set
The iconic GP4-RB is carved from a billet in two pieces is now also available
with an anodised black finish to enhance the technical performance and appearance
of the motorbike.
Features:
CNC billet aluminum monobloc
2 piece caliper body
4 aluminum pistons 30mm/34mm
2 pin
Hard anodized
Radial mount
Offset: 30mm
Compatible disc height 32mm-34mm
Black with red logo
Brake pads included
Brake pad shape M
Sold each
Brembo Moto3 Front Brake Caliper
Features:
CNC billet aluminum monobloc
2 titanium pistons 34mm
Radial 60mm mount
Hard anodized
Offset: 20.5mm
Compatible disc height 30mm
Brake pads not included
Compatible with brake pad shape R
Sold each
Brembo Moto3 Front Brake Caliper
Features:
CNC billet aluminum monobloc
2 aluminum pistons 34mm
Stainless hardware
Radial 60mm mount
Hard anodized
Offset: 20.5mm
Compatible disc height 30mm
Brake pads not included
Compatible with brake pad shape R
Sold each
Brembo 108mm 2 Piece Front Brake Caliper
Features:
CNC billet aluminum
2 piece caliper body
108mm radial mount
Hard anodized
4 aluminum pistons 32mm/36mm
Stainless steel hardware
Offset: 22,5
For use with narrow band disc
Compatible disc height 30mm
Brake pads not included
Compatible with brake pad shape N
Sold each
Brembo .484 Cafe Front Brake Caliper
The Brembo “484” caliper is designed to meet the need to impart
a bold Café Racer connotation to the motorbike. This caliper is made
entirely from a solid block of aluminium machined using state-of-the-art CAM
technology. The caliper is finished with a hard anthracite black oxidation treatment
with the characteristic red Brembo logo.
Features:
CNC billet aluminum monobloc
2 piece caliper body
4 aluminum pistons 32mm
Radial...
Brembo .484 Cafe Front Brake Caliper Set
The Brembo “484” caliper is designed to meet the need to impart
a bold Café Racer connotation to the motorbike. This caliper is made
entirely from a solid block of aluminium machined using state-of-the-art CAM
technology. The caliper is finished with a hard anthracite black oxidation treatment
with the characteristic red Brembo logo.
Features:
CNC billet aluminum monobloc
2 piece caliper body
4 aluminum pistons 32mm
Radial...
Brembo GP4-RB Front Brake Caliper Set
The iconic GP4-RB is carved from a billet in two pieces, and now also available
with an anodised black finish to enhance the technical performance and appearance
of the motorbike.
Features:
CNC billet aluminum monobloc
2 piece caliper body
4 aluminum pistons 30mm/34mm
2 pin
Hard anodized
Radial mount
Offset: 30mm
Compatible disc height 32mm-34mm
Black with red logo
Brake pads included
Brake pad shape M
Sold as a set,...
Brembo M50 Front Brake Caliper Set
Features:
Cast aluminum monobloc
1 piece caliper body
4 aluminum pistons 30mm
Stainless steel hardware
Titanium anodized finish
100mm radial mount
Offset: 30mm
Compatible disc height 32mm-34mm
Titanium grey with red logo
Brake pads included
Brake pad shape C
Sold as a set, left and right
Brembo Stylema Front Brake Caliper
Stylema is a lightweight, compact, carefully sculpted and high performing caliper
that has all the technical features and design of a product destined to outshine
the rest and to bring its superiority to the next generation of leading-edge
bikes.
Stylema has less volume around the pistons and brake pads, reducing the internal
space occupied by brake fluid, to offer a more immediate response.
It has also lost weight, down by about 7...
Brembo GP4-RS Front Brake Caliper
Designed for racing enthusiasts and for those who want real innovation for
their bike's brake calipers, the Brembo GP4-RS was inspired by the one-piece
caliper developed for the MotoGP and now available to enthusiasts everywhere.
Lightweight
The GP4-RS one-piece caliper was created using a very complex foundry technique
exclusive to Brembo. The result is a caliper that is 10% lighter than the renowned
M4 One-Piece, a long-standing champion thanks...
Brembo 108mm Front Brake Caliper
Features:
CNC billet aluminum monobloc
Single piece caliper body
108mm radial mount
Nickel finish
4 titanium pistons 34mm/38mm
Offset: 22,5
For use with narrow band disc
Compatible disc height 30mm
Brake pads not included
Compatible with brake pad shape Q
Sold each
Brembo GP4-RX Front Brake Caliper
The body of GP4-RX caliper is carved entirely from a billet and consists of two
mechanically connected pieces. Particular care was devoted to seeking high braking
power and rigidity by using innovative design solutions. The hydraulics are
the result of careful fine-tuning. The use of a single piston diameter allowed
a further increase in braking power and modularity.
Features:
CNC billet aluminum monobloc
2 piece caliper body
4...
Brembo GP4-PR 108mm Mount Front Brake Caliper
Features:
CNC billet aluminum monobloc
4 titanium pistons 32mm/36mm
Radial 108mm mount
Nickel coating
Offset: 21mm
For use with narrow band disc
Compatible disc height 30mm
Brake pads not included
Compatible with brake pad shape Q
Sold each
Brembo Moto3 Front Brake Caliper Set
Features:
CNC billet aluminum monobloc
Single piece caliper body
2 titanium pistons 34mm
60mm radial mount
Hard anodized
Offset: 30mm
Brake pads not included
Compatible with brake pad shape R
Sold as a set, left and right
Brembo GP4-MS Front Brake Caliper Set
Designed and developed to equip the ultimate generation of powerful road bikes,
the GP4-MS is a brake caliper born from the racetrack for the road. This is
because it embeds all the latest technologies, the most innovative processes
and materials together with the know-how acquired by Brembo in its many years
of experience in the field of the racing world.
Just like the Brembo calipers used by professional riders in MotoGP, the new...