Ultimate touring comfort. No more wrist, shoulder, neck or back pains caused by reaching out of your comfort zone
Taller and more rearset than the manufacturer's or any after market adapter
Direct replacement of original handlebar
Fits ABS- and non-ABS-equipped bikes
No modifications necessary for installation
All the original lines and hydraulics remain unchanged
Bar control locating holes are precision drilled for factory components
Original damper weights and hand guards are retained
Position-adjustable up and down, forward and backward, inward and outward
Independent wrist height and reach adjustability for ultimate rider fit and comfort
Allow brake and clutch lever angles to be adjusted in minutes
2" to 4" inch (5 cm to 10 cm) taller** than stock
2" to 4" inch (5 cm to 10 cm) rear-adjustable offset**
Reduced 30-inch (76cm) width allows full turns to the steering stops
Improved leverage and handling, especially at lower speeds
Rigid, flex-free design and exceptional build quality
Handcrafted In The USA
HeliBars are designed for easy installation, in most cases retaining all original
cables and hydraulic lines, and requiring little or no modification to your
original equipment. They are made with pride by American craftsmen and women.
Greater Long Distance Comfort
HeliBars provides motorcyclists with better handling ergonomics and greater
long distance comfort without distracting from riding excitement. HeliBars research
& development engineers are riders like you, and they take meticulous care to
address all of your handlebars deficiencies before they design the perfect fix
for your bike. When you buy HeliBars, you are benefiting from years of experience
in riding comfort and performance!
It is the responsibility of the customer to ensure correct and proper sizing
when placing an order. There are no returns, cancellations or exchanges on any
apparel, no exceptions. This includes apparel such as leather suits, jackets,
pants, clothing, boots and gloves. If you have any questions regarding sizing,
please refer to the manufacturers sizing charts or contact Bayside Performance
for further assistance.
The following are final sale, no exchanges, cancellations or returns:
Helmets
Apparel And Protection
Special Order Items
Made To Order Items
Electrical
Race Bodywork
Clearance Items
Items Removed From Original Packaging
Parts That Have Been Installed Or Attempted To Be Installed
Product Exchange/Return Policy:
If you would like to exchange a product, contact Bayside Performance within
one (1) day upon the receipt of the sales order. All returns must be approved
by Bayside Performance. Upon Bayside Performance approval for inspection of
the returned product, Bayside Performance assigns a Return Authorization (RA)
Number. The RA number is only for the product that Bayside Performance has approved
for inspection.
Shipping costs of the returned product is the liability of the customer; Bayside
Performance does not accept any collect on delivery (COD) shipments. The RA
number must be clearly marked on the outside of the box; returns without the
marked RA number will be refused and may be returned to the customer. All approved
returns must received by Bayside Performance within ten (10) days of the RA
number provided to the customer. Always send your item back Canada Post with
tracking and email us the tracking number.
All returned merchandise must be in its original packaging with attached tags,
instructions and in new condition. Both the product and packaging must be in
new condition free from scratches, blemishes, tears or dents. It is the customer's
responsibility to ensure the returning merchandise to Bayside Performance is
adequately packaged, preventing any loss or damage to the returning product.
Any parts that have been removed from the package or attempted to be installed
are not returnable.
All claims for missing products must be made by the end of the next business
day upon the receipt of the order, after that time Bayside Performance will
not be liable for any shortages. All claims for damaged merchandise must be
made to the shipping carrier; ensure that you keep all shipping cartons and
all packaging materials for carrier inspection. It is the responsibility of
the customer to initiate any claims with the carrier.
All returned merchandise to Bayside Performance is subject to a 20% restocking
fee. All canceled orders are subject to a 20% restocking fee if the item has
already been ordered in. Any purchases that are refused and returned to Bayside
Performance are deemed non-deliverable and subject to a restocking fee, all
shipping costs and possibly our final sale policy.
Shipping and insurance costs are non-refundable. If a refund is approved by
Bayside Performance, the reimbursement of money will be issued to the customer
in the same monetary form as the payment was made to Bayside Performance at
the time of the purchase.
Inventory:
Bayside Performance specializes in custom order hard to get or made to
order items. Our website shows inventory two ways.
We are experiencing random Covid-19 lockdown related delays that are out of our control. We ask that you be patient during this time.
In Stock:
In stock items would be shipped same or next business day however
inventory numbers are not a guarantee. If in stock items are not
available to ship right away we would contact you with an estimate.
Available To Order:
Available to order items where not discontinued the last time manually
checked.They may have estimated time in which they should leave our
store but this is not a guarantee. Available to order items must arrive
to us first and be checked prior to shipping to you. We do stock the
most commonly sold items and have a decent inventory however many items
have to be sourced at the time of sale from many different distributors.
We would contact you with a delivery estimate before processing your
order if the posted estimate was incorrect or was not posted.
Parts Fitment Guarantee:
Aftermarket parts do not always fit like OEM parts. Some aftermarket parts
require modifications or fitment to work correctly. For example carbon fiber
and race bodywork components often need trimming and modifications to fit
correctly.
Bayside Performance only guarantees fitment of these parts if they are installed
by a licensed tech with experience installing aftermarket parts. Bayside Performance
reserves the right to investigate each fitment issue and decide whether the
part is incorrect or incorrect installation is the problem. The customer is
responsible to install parts correctly or hire a company with the skills to
complete the work properly. Please call us for more details.
HeliBars Triple Clamp and Risers
HeliBars is excited to introduce the new tour performance replacement top triple
clamp with built in risers for the wildly popular BMW R Nine T Racer.
Dramatically improves the handlebar position by a net gain to rider of 5 1/2"
3 1/2" taller
4 1/4" rearward
Machined from 6061 T6 aluminum
Retains stock handlebar tubes and hardware
Retains stock instruments and mount
Maintains stock clutch and front brake hydraulic lines, simplifying installation...
HeliBars Tour Performance Handlebar Risers
HeliBars Tour Performance Handlebar Riser Adapters installs beneath your stock bars and raises them 1" (25mm) and moves them towards the rider 1 1/4" (32mm).
All original cables and hydraulic lines are retained
Maintains stock hardware
Metal "skirts" hide the stock top triple clamp mounting section
Color matched to the stock silver to give it a seamless appearance
Handcrafted In The USA
HeliBars are designed for easy installation, in most...
HeliBars Tour Performance Handlebar Risers
HeliBars Tour Performance handlebar riser adapters installs beneath your stock bars and raises them 1" (25mm) and moves them towards the rider 1" (25mm).
Wrist angle optimized for a significant improvement in comfort
All original cables and hydraulic lines are retained and bar end weights are accepted
Handcrafted In The USA
HeliBars are designed for easy installation, in most cases retaining all original
cables and hydraulic lines, and...
HeliBars Tour Performance Handlebar Risers
HeliBars Tour Performance Handlebar Riser Adapters installs beneath your stock bars and raises them 1 1/4" (32mm) and move them towards the rider 1" (25mm).
All original cables and hydraulic lines are retained
Maintains stock hardware
Metal "skirts" hide the stock top triple clamp mounting section
Color matched to the stock silver to give it a seamless appearance
Handcrafted In The USA
HeliBars are designed for easy installation, in most...
HeliBars Tour Performance Handlebar Risers
HeliBars Tour Performance Handlebar Riser Adapters installs beneath your stock bars and raises them 1 1/4" (32mm) and move them towards the rider 1" (25mm).
All original cables and hydraulic lines are retained
Maintains stock hardware
Metal "skirts" hide the stock top triple clamp mounting section
Color matched to the stock silver to give it a seamless appearance
Handcrafted In The USA
HeliBars are designed for easy installation, in most...
HeliBars Tour Performance Handlebar Risers
HeliBars Tour Performance handlebar riser adapters installs beneath your stock bars and raises them 1" (25mm) and moves them towards the rider 1" (25mm).
Wrist angle optimized for a significant improvement in comfort
All original cables and hydraulic lines are retained and bar end weights are accepted
Handcrafted In The USA
HeliBars are designed for easy installation, in most cases retaining all original
cables and hydraulic lines, and...
HeliBars Tour Performance Handlebar Risers
HeliBars Tour Performance Handlebar Riser Adapters installs between the factory handlebar mounting clamp risers and the top triple clamp to reduce the reach to the grips.
1 3/8" (34.8mm) Taller**
1 9/16" (39.2mm) Rearward**
All original cables and hydraulic lines are retained
Hydraulic line bleeder bolt included
Clutch line extension included
Color matched powder coat for great durability
Install tools required: Torque wrench, T45...
HeliBars TracStar Bars
This TracStar offering is a one piece alloy marvel and natural evolution of our already successful handlebars. CNC machined using Heli Modified’s proprietary method rendering handlebars that provide better handling, more comfort and offer vastly improved feedback and leverage. Designed for the rider that wants more comfort with a trick look and feel.
1 1/4” (32mm) taller
3/4” (19mm) rearward
1” (25mm) wider at 27 1/4"
Durable UV resistant silver powdercoat...
HeliBars Tour Performance Handlebar Risers
HeliBars Tour Performance handlebar relocation adapters installs between the factory handlebar mounting clamp risers and the top triple clamp to reduce the reach to the grips.
1" (25mm) Taller
1 1/16" (33.34mm) Rearward
All original cables and hydraulic lines are retained
Hydraulic line bleeder bolt included
Color matched powder coat for great durability
Exceptional build quality
Handcrafted In The USA
HeliBars are designed for easy...
HeliBars Tour Performance Handlebar Risers
HeliBars is pleased to introduce the Tour Performance Riser, designed to provided more comfort and built tough to survive whatever you can throw at it!!
2" taller 2 1/4" rearward
Machined from 6061 T6 Aluminum
Retains stock handlebar, hardware and hydraulic lines
Handcrafted In The USA
HeliBars are designed for easy installation, in most cases retaining all original
cables and hydraulic lines, and requiring little or no modification...
HeliBars Tour Performance Handlebar Risers
HeliBars is pleased to introduce the Tour Performance Riser, designed to provided more comfort and built tough to survive whatever you can throw at it!!
2" taller 2 1/4" rearward
Machined from 6061 T6 Aluminum
Retains stock handlebar, hardware and hydraulic lines
Handcrafted In The USA
HeliBars are designed for easy installation, in most cases retaining all original
cables and hydraulic lines, and requiring little or no modification...
HeliBars Tour Performance Handlebar Risers
HeliBars Tour Performance Handlebar Riser Adapters installs beneath your stock bars and raises them 1" (25mm) and moves them towards the rider 1 1/4" (32mm).
All original cables and hydraulic lines are retained
Maintains stock hardware
Metal "skirts" hide the stock top triple clamp mounting section
Color matched to the stock silver to give it a seamless appearance
Handcrafted In The USA
HeliBars are designed for easy installation, in most...